100T Hydraulic pump Jack cp 700 hand hydraulic Pump

100 ton Low profile hydraulic pump

69mm hand hydraulic pump

700 cp hydraulic pump

hydraulic hand pump with reservoir

Product Description

This hydraulic cylinder is not for the CAR
(1). when several hydraulic jacks work at the same time, they should be directed by someone to make the lifting or falling simultaneously. Two adjacent hydraulic jacks shall be supported with wooden blocks to ensure that the gap is secured against sliding.
(2). when using hydraulic jack, always pay attention to the sealing part and pipe joint part, and must ensure its safety and reliability.
(3). hydraulic jacks are not suitable for sites where acids, alkalis, or corrosive gases are applied.

30 ton Hydraulic Ram Jack Parameters:
Up and down without obstacles: Special treatment of piston to prolong service life
Fast Connector + Plastic Dust-proof Cover: The joint adopts threaded ZG3/8 fast joint, thread locking and compact structure.
Model: FPY-100D; Tonnage: 100T ; Stroke 1: 20MM; Stroke 2: 24MM; Stroke 3: 25MM ;Total stroke: 69MM
Oil storage capacity: 225CC; Self height: 87MM; Weight: 20.5kg; Compression area: 56.7mm²
Inner diameter 1: 30mm; Inner diameter 2: 52mm; Inner diameter 3: 81MM ; External diameter: 131x155mm

CP-700 Hydraulic Hand Pump Parameters:
Beautiful and durable, smooth surface, good sealing.
Relief Valve: When working, tighten the return valve clockwise; When releasing pressure, loosen the return valve counterclockwise.
Oil Tube and Joint: Comes with 1.8m oil tube;Fast Joint Thread ZG3/8.
Ventilation Nut: There is a switch indication at the tail; When using, the nut must be loosened to avoid sealing of the oil tank.
Model: CP-700
High pressure: 9947PSI(700kg/cm²)
Low pressure: 284PSI(20kg/cm²)
High pressure oil quantity: 2.3cc
Low pressure oil quantity: 13cc
Oil storage capacity: 900cc
Weight: 9.5kg