PATG 3102NB Turbo II Air Hydraulic Hand/Foot Pump

Home » Enerpac Hydraulic Pump » PATG 3102NB Turbo II Air Hydraulic Hand/Foot Pump

Enerpac Turbo II Air Over Hydraulic Pumps generate the hydraulic pressure you need using the air pressure you have available. The Air Saver Piston reduces air consumption, and the pump can start at low pressures from 50-125 psi. 

Turbo II Air-Hydraulic Pumps suit medium or lower cycle applications. They provide all the power and speed needed for simple clamping circuits and single acting tools. At only 75 dBA, the Turbo II Series helps to keep the noise level to a minimum.  

Choose from a range with maximum working pressure of either 5,000 or 10,000psi, and various reservoir capacities from 116 – 462 in3 (2100 – 7500 cm3). 

Each PATG pump variant includes a 3-way, 3-position valve for Advance / Hold / Retract functions. 

PATG3102NB, Turbo II Air Hydraulic Pump, Hand/Foot Operated 3-way Valve, 180 in3/min Oil Flow at 100 psi

PRODUCTS

Enerpac Hydraulic Pump


Hydraulic Pump


Hand Hydraulic Pump


12V Hydraylic Pump


10000 PSI Hydraulic Pump


10 Ton Hydraulic Pump


Electric Tensioner Pump


Double Hydraulic Pump


FEATURED PRODUCTS
CONTACT DETAILS
+86-137 11559203
kim@pumpvv.com

hydraulic air foot pump

hand/foot hydraulic pump

enerpac Air Driven Hydraulic Pump

10000PSI enerpac air hydraulic pump

Product Line: Industrial Tools
Model: PATG3102NB

Description

Model: PATG3102NB   |  ECCN: EAR99    |   Harmonization: 8413500080
Series: PATG   |  Product Line: Workholding Tools

Enerpac Turbo II Air Over Hydraulic Pumps generate the hydraulic pressure you need using the air pressure you have available. The Air Saver Piston reduces air consumption, and the pump can start at low pressures from 50-125 psi. 

Turbo II Air-Hydraulic Pumps suit medium or lower cycle applications. They provide all the power and speed needed for simple clamping circuits and single acting tools. At only 75 dBA, the Turbo II Series helps to keep the noise level to a minimum.  

Choose from a range with maximum working pressure of either 5,000 or 10,000psi, and various reservoir capacities from 116 – 462 in3 (2100 – 7500 cm3). 

Each PATG pump variant includes a 3-way, 3-position valve for Advance / Hold / Retract functions. 

Turbo II Air Over Hydraulic Pump Series

  • PATG – Treadle for foot or hand operation  
  • PARG – Pendant Operation 
  • PAMG – Manual lever operated. For double-acting applications 
  • PACG – For remote valve mount. For work holding, 5000 psi (350 bar). 
  • PASG – Includes mount for a single DO3 Valve. 
  • On-demand stall-restart operation maintains system pressure, providing clamping security
  • External adjustable pressure relief valve (behind sight glass)
  • Internal pressure relief valve provides overload protection
  • Reduced noise level to 75 dBA
  • Operating air pressure: 50-125 psi – enables pump to start at low air pressure**
  • Hydraulic to air ratio: 45:1
  • Reinforced heavy-duty lightweight reservoir for applications in tough environments
  • Five valve mounting options provide flexibility in setup and operation
  • Fully serviceable air motor assembly
  • User supplied valves

** NOTE: From 50-125 psi air inlet pressure. Performance is significantly diminished below 50 psi. Performance may vary compared to listed values due to seal friction, internal pressure drops and manufacturing tolerances. Be sure to allow some flexibility on air inlet pressure.

Similar Posts