Salami 1.5PE Series Gear Pump

Home » Hydraulic Pump » Salami 1.5PE Series Gear Pump

The 1.5PE series gear pumps offer superior performance and reliability in heavy-duty applications. The design includes an advanced bushing and seal configuration that optimizes performance even in high temperature and low viscosity conditions.

PRODUCTS

Enerpac Hydraulic Pump

Hydraulic Pump

Hand Hydraulic Pump

12V Hydraylic Pump

10000 PSI Hydraulic Pump

10 Ton Hydraulic Pump

Electric Tensioner Pump

Double Hydraulic Pump

FEATURED PRODUCTS
CONTACT DETAILS
+86-137 11559203
kim@pumpvv.com
dc hydraulic pump

3000 RPM hydraulic pump

2465 PSI hydraulic pump

SAE AA 2 Bolt hydraulic pump

dixie chopper hydraulic pump
double acting 12v hydraulic pump
double acting hydraulic pump
Shaft:SAE-AA 2 Bolt
PSI1600

Description

Made with an aluminum alloy body, cast iron flanges, and cast-iron rear covers.
Integral gear with 12 teeth.
Available with flanges, shafts, and ports for European and American standards.
Displacement: 0.67 (11)
GPM @ 1800 RPM: 5.22
Rotation: Clockwise (RH)lic applications.

Similar Posts

Hydraulic Pressure Test Pump 860PSI 3 Gallon Tank punp

Hydraulic Pressure Test Pump 860PSI 3 Gallon Tank punp

Hydraulic Pressure Test Pump 0-60 bar, can be applied in various scenarios; equipped with high-pressure hose and brass connector with female thread, size R 1/2″ The pressure gauge is equipped with three measurement units, the pressure range is 0-60 Bar / 6 MPA / 860 PSI PioneerWorks hydraulic pump 860 psi hydraulic pump Stainless Steel…

5.9 GPM Chief Hydraulic Gear Pump 3650 PSI hydraulic pump

5.9 GPM Chief Hydraulic Gear Pump 3650 PSI hydraulic pump

Constructed of an aluminium center section and cast iron end plates, model GP-F20 is a high-pressure hydraulic gear pump with 11 displacement sizes from 0.24 – 1.95 in. The standard mounting flange is a SAE A – 2 bolt. 5.9 GPM 2 STAGE HYD PUMP 2 stage hydarulic pump 5.9 GPM hydraulic pump 3650 PSI…

AMZCNC 10000 Psi Hydraulic Hand Pump

AMZCNC 10000 Psi Hydraulic Hand Pump

This 10 ton porta power replacement pump is ideal for frame straightening and other repairs.This hydraulic portal power pump is made of rust-proof chrome-plated Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70% Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil…

Concentric Two-Stage Pump 16 GPM 

Concentric Two-Stage Pump 16 GPM 

Two Stage Hydraulic Pumps offer significant advantages in industrial applications. Firstly, they provide a higher pressure output compared to single-stage pumps, thereby increasing efficiency in demanding tasks such as heavy machinery and hydraulic presses. Secondly, the design of two-stage pumps allows for variable flow rates, allowing the output to be adjusted to specific needs, thus…

Salami 2600PSI Gear Pump

Salami 2600PSI Gear Pump

Equipped with bi-directional check valves, the Chief MH Series series features small displacement and high pressure ratings. The MH series Pump/motors have an aluminum body with cast iron flange construction, and case drain. Available displacements range .065 to.517cu.in/rev. Similar to MTE “D” series and Sauer-Danfoss Webster YB series. 2600 PSI hydraulic pump 2500 RPM hydraulic…

Two stage pump 5 gpm hydraulic pump

Two stage pump 5 gpm hydraulic pump

Two Stage Hydraulic Pumps offer significant advantages in industrial applications. Firstly, they provide a higher pressure output compared to single-stage pumps, thereby increasing efficiency in demanding tasks such as heavy machinery and hydraulic presses. Secondly, the design of two-stage pumps allows for variable flow rates, allowing the output to be adjusted to specific needs, thus…