Equipped with bi-directional check valves, the Chief MH Series series features small displacement and high pressure ratings. The MH series Pump/motors have an aluminum body with cast iron flange construction, and case drain. Available displacements range .065 to.517cu.in/rev. Similar to MTE “D” series and Sauer-Danfoss Webster YB series. 2500 PSI hydraulic pump 4000 RPM hydraulic…
Model GP-PTO is a Power Take Off gear pump constructed with cast iron end plates and an aluminum center section. It offers 4 displacement sizes from 3.41 to 9.76 in3/rev 56-160 cm3/rev. Standard drive is 1 3/8” diameter 6-Tooth female spline or 1 3/8″ diameter 21-Tooth female spline. 7.4 GPM hydraulic pump 2500PSI hydraulic pump…
Model GP-PTO is a Power Take Off gear pump constructed with cast iron end plates and an aluminum center section. It offers 4 displacement sizes from 3.41 to 9.76 in3/rev 56-160 cm3/rev. Standard drive is 1 3/8” diameter 6-Tooth female spline or 1 3/8″ diameter 21-Tooth female spline. 16.6 GPM hydraulic pump 2500PSI hydraulic pump…
Model GP-PTO is a Power Take Off gear pump constructed with cast iron end plates and an aluminum center section. It offers 4 displacement sizes from 3.41 to 9.76 in3/rev 56-160 cm3/rev. Standard drive is 1 3/8” diameter 6-Tooth female spline or 1 3/8″ diameter 21-Tooth female spline. 22.1 GPM hydraulic pump 2500PSI hydraulic pump…